Best Coilovers For Rsx

Frequently Asked Questions

1. What are the best coilovers for rsx?

There is no definitive answer to this question as everyone’s preferences will differ. However, some of the best coilovers for RSX models include the KW Variant 3, the BC Racing BR Series and the Megan Racing Street Series. These coilovers are all popular choices among RSX owners and offer great performance and ride quality.

2. What are the benefits of coilovers for rsx?

Coilovers are a type of suspension that offer adjustable ride height. This is beneficial for those who want to lower their car for aesthetic or performance reasons. Additionally, coilovers often improve handling and can give the driver more control over the car.

3. How do I install coilovers for rsx?

Coilovers are a type of suspension that allows for adjustable ride height. They are generally used for track or race cars, but can also be used on street cars. Installation of coilovers is not a difficult process, but does require some basic mechanical knowledge.

The first step is to remove the old suspension from the car. This will generally involve removing the wheels, then disconnecting the shocks or struts from the suspension. Once the old suspension is removed, the coilovers can be installed in its place.

Most coilovers will come with instructions on how to install them. It is important to follow these instructions carefully, as improper installation can lead to problems. In general, the process involves mounting the coilovers to the suspension, then connecting them to the shock absorbers.

Once the coilovers are installed, they can be adjusted to the desired ride height. This is typically done by turning a knob or screw on the coilover itself. It is important to adjust the coilovers evenly, so that the car does not lean to one side.

After the coilovers have been installed and adjusted, the car can be lowered back to the ground and the wheels can be reinstalled. The car should then be test-driven to make sure that the suspension is working properly.

4. How do I adjust coilovers for rsx?

If you’re looking to adjust the coilovers on your RSX, there are a few things you’ll need to keep in mind. First, you’ll need to find the right tools for the job. A socket wrench and an adjustable wrench will do the trick.

Next, you’ll need to find the adjustment screws on the coilovers. These are typically located on the bottom of the coilovers, near the wheel. Once you’ve located the adjustment screws, you can begin to make your adjustments.

If you’re looking to raise the height of your RSX, you’ll want to turn the adjustment screws clockwise. For each turn of the screw, you’ll likely see a change of about 1/4″. So, if you want to raise the height of your RSX by 1″, you’ll need to turn the adjustment screws 4 times. On the other hand, if you’re looking to lower the height of your RSX, you’ll want to turn the adjustment screws counter-clockwise.

Just like before, for each turn of the screw, you’ll see a change of about 1/4″. It’s important to note that the adjustment screws are usually very sensitive. So, you’ll want to make your adjustments slowly and in small increments.

Once you’ve made your adjustments, be sure to test them out by driving around before fully tightening the screws. This will allow you to make any necessary adjustments.