How To Sync I Pilot Remote

The i-Pilot remote is a great tool that allows you to control your trolling motor from anywhere on the boat. It’s especially useful when fishing alone, or when the trolling motor is in a difficult to reach location. Syncing the remote is a simple process, and only takes a few minutes.

• Download the i-Pilot Link app from the App Store or Google Play
• Connect your i-Pilot remote to your smartphone or tablet using the micro USB cable
• Open the i-Pilot Link app and follow the on-screen instructions to complete the initial setup
• Once the initial setup is complete, you can begin using the i-Pilot Link app to control your trolling motor

Credit: www.youtube.com

How do I pair my i Pilot app?

If you have an i-Pilot remote, you can easily keep it synchronized with your trolling motor. Here are a few easy steps to follow: 1. Log into your i-Pilot account on the Humminbird website.

2. Select the “My Products” tab. 3. Click on the “i-Pilot Link” tab. 4. Select the “Synchronize Remote” option.

5. Enter the serial number of your i-Pilot remote in the provided field. 6. Click on the “Synchronize” button. 7. Your remote should now be synchronized with your trolling motor!

How do I unlock my Ipilot remote?

Linking your i-Pilot remote to your trolling motor is a quick and easy process. Here are the steps: 1. Make sure your trolling motor is turned off.

2. Find the “Link” button on your i-Pilot remote. It is usually located on the front or side of the remote. 3. Press and hold the “Link” button for three seconds.

The i-Pilot’s LED light will begin flashing rapidly, indicating that it is in linking mode. 4. On your trolling motor, find the “Learn” button. It is usually located on the back of the motor or on the control panel.

5. Press the “Learn” button. The trolling motor’s LED light will begin flashing, indicating that it is in linking mode. 6. The i-Pilot remote and trolling motor are now linked.

The lights on both devices will stop flashing and remain solid.

How do you pair Minn Kota puck?

In order to sync your i pilot remote, you will need to first connect the remote to the trolling motor. To do this, you will need to locate the sync port on the trolling motor and insert the remote’s sync cable. Once the remote is connected to the trolling motor, you will need to press and hold the “Menu” button on the remote.

While continuing to hold the “Menu” button, press and release the “Power” button. The trolling motor and remote will now be synced.

How to turn on i-pilot remote

You’ve just purchased a new Minn Kota trolling motor with i-Pilot technology, and you’re eager to get out on the water and try it out. But before you can start trolling, you need to sync your i-Pilot remote to your trolling motor. Here’s a step-by-step guide to doing just that:

1. Make sure your trolling motor is turned off. 2. Insert the batteries into your i-Pilot remote. 3. Press and hold the “On/Off” button on your trolling motor for 5 seconds.

4. Press and hold the “On/Off” button on your i-Pilot remote for 5 seconds. 5. When the lights on both the trolling motor and the i-Pilot remote turn green, they are successfully paired and you’re ready to start trolling!

How to pair i-pilot remote to terrova

If you own a Minn Kota trolling motor with i-Pilot, you can use the i-Pilot remote to control the motor from anywhere on the boat. The remote will also allow you to operate the Spot-Lock feature, which can be very helpful when you’re fishing in a specific location. Here’s how to sync the i-Pilot remote with your trolling motor:

1. Start by turning on the i-Pilot system at the trolling motor head. 2. Then, press and hold the “Mode” button on the remote for about 5 seconds. 3. The red and green lights on the remote will start flashing, indicating that it is in pairing mode.

4. Finally, press the “Pair” button on the trolling motor head. The lights on both the remote and trolling motor head will turn solid, indicating that they are paired.

I pilot remote won’t pair

If you’ve ever wanted to know how to sync your i pilot remote, then you’ve come to the right place. In this blog post, we’ll walk you through the process step-by-step. First, you’ll need to make sure that your i pilot remote is properly charged.

If it’s not, then it won’t be able to communicate with your trolling motor. Next, you’ll need to locate the “learn” button on your i pilot remote. Once you’ve found it, press and hold it down for about 5 seconds.

After that, you should see a light on your remote start flashing. At this point, you’ll need to press the “sync” button on your trolling motor. Once you’ve done that, the light on your remote should stop flashing and stay solid.

That’s it! You’ve now successfully synced your i pilot remote.

How to reset minn kota i-pilot remote

If you have a remote for your trolling motor, there’s a good chance it’s an i-Pilot remote. These remotes are great for controlling your trolling motor, but they can be a little tricky to sync up. Here’s a quick guide on how to do it.

First, make sure your trolling motor is turned off. Then, press and hold the “i-Pilot” button on your remote for about 5 seconds. After that, press and release the “Up” arrow on the remote.

You should see a light on the remote start blinking. Once the light starts blinking, press and hold the “i-Pilot” button on your trolling motor for about 5 seconds. The light on the trolling motor should start blinking as well.

If it doesn’t, try again from the beginning. Once both the remote and the trolling motor are blinking, they should sync up automatically.

How to use minn kota i-pilot remote

If you have a Minn Kota trolling motor with i-Pilot, you can use the i-Pilot remote to control the motor from anywhere on the boat. The i-Pilot remote will also give you access to the Spot-Lock feature, which allows you to lock the trolling motor in place. Here’s how to sync the i-Pilot remote to your trolling motor:

1. Make sure the i-Pilot remote is turned on. 2. Press and hold the Sync button on the trolling motor for 5 seconds. 3. Press and hold the Sync button on the i-Pilot remote for 5 seconds.

4. The trolling motor and i-Pilot remote are now synced.

How to unlock i-pilot remote

If you’ve ever wondered how to sync your i pilot remote, wonder no more! Here are easy instructions to follow: 1. Start by making sure your remote is powered on.

If it’s not, press and hold the power button until the power indicator light comes on. 2. Once your remote is powered on, press and hold the “Menu” button. 3. While holding the “Menu” button, press and release the “Power” button.

4. Continue holding the “Menu” button until the power indicator light flashes. 5. When the power indicator light starts flashing, release the “Menu” button. 6. Press and hold the “Set” button on your remote.

7. While holding the “Set” button, press and release the “Power” button. 8. Continue holding the “Set” button until the power indicator light flashes.

How to pair minn kota copilot remote

If you own a Minn Kota trolling motor with i-Pilot, you know how great it is to have a motor that can pretty much drive itself. But what happens when you want to use a different remote, or when you want to update the firmware on your i-Pilot? In order to do either of those things, you need to sync your i-Pilot remote with your trolling motor.

Here’s how: 1. Make sure that the batteries in both your remote and your trolling motor are fresh and fully charged. 2. On your trolling motor, press and hold the i-Pilot button for 5 seconds.

This will put the motor into remote-sync mode. 3. On your remote, press and hold the “set” button for 3 seconds. This will put the remote into sync mode.

4. Within 30 seconds, press and release the “set” button on your remote.

How to pair i-pilot to iphone

If you have a Minn Kota trolling motor with i-Pilot, you can sync your remote to your trolling motor using the following steps: 1. Make sure your trolling motor is turned off. 2. Press and hold the i-Pilot button on your remote for 5 seconds.

3. The red light on your remote will start flashing, indicating that it is in sync mode. 4. Press the i-Pilot button on your trolling motor. The red light on your trolling motor will start flashing, indicating that it is in sync mode.

5. The red light on your remote and trolling motor will stop flashing and remain solid, indicating that they are now synced.

Conclusion

If you have an i-Pilot remote, you can easily sync it with your trolling motor. Here’s a step-by-step guide on how to do it: 1. Make sure your i-Pilot remote is turned on.

2. Press and hold the “Sync” button on your remote. 3. Press and hold the “Power” button on your trolling motor. 4. When the lights on your trolling motor and remote start flashing, release both buttons.

5. That’s it! Your remote is now synced with your trolling motor.