How to Replace a Coil Spring

To replace a coil spring, you need to lift the vehicle, remove the old spring, and install the new one. It is a straightforward process that requires proper tools and caution.

When replacing a coil spring, safety is paramount to avoid injury or damage to the vehicle. Following the manufacturer’s guidelines and using the right equipment are essential steps in ensuring a successful replacement. Taking the time to properly replace a worn-out coil spring can improve your vehicle’s performance and ride quality.

In this guide, we will walk you through the steps to replace a coil spring efficiently and effectively.

Gathering Tools And Materials

Before attempting to replace a coil spring, it’s important to gather the necessary tools and materials. Having the right equipment on hand will make the process much smoother and ensure that you can complete the job safely and efficiently.

Researching The Right Tools

Researching and identifying the right tools for the job is the first step in gathering what you need. Here are the essential tools you’ll need to replace a coil spring:

  1. Jack and jack stands: These are crucial for safely lifting and supporting the vehicle.
  2. Wrenches and sockets: You’ll need these to remove the bolts and nuts that hold the suspension components together.
  3. Spring compressor: This tool is essential for safely compressing the coil spring, allowing you to remove and replace it.
  4. Pry bar: A pry bar can help you remove any stubborn components or provide leverage when needed.
  5. Torque wrench: This tool ensures that you tighten all bolts and nuts to the manufacturer’s specifications.
  6. Penetrating oil: This can help loosen any rusted or seized components, making them easier to remove.

Gathering Safety Gear

Ensuring your safety is paramount when working with vehicles and their suspension systems. Here are the essential safety gear items you’ll need:

  • Safety glasses: These protect your eyes from any debris or fluids that may spray during the process.
  • Gloves: Wearing gloves provides extra grip and protects your hands from sharp edges or hot components.
  • Protective clothing: Consider wearing long sleeves and pants to protect your skin from dirt, grease, or any sharp objects.
  • Work boots: Sturdy work boots with a good grip will keep your feet protected and provide stability while working.
  • Fire extinguisher: Although rare, it’s always a good idea to have a fire extinguisher nearby in case of emergencies.

By gathering the necessary tools and safety gear, you’ll be well-prepared to replace a coil spring. This will help you complete the task efficiently and safely, ensuring your vehicle’s suspension is back in optimal condition.

Preparing The Vehicle

In order to safely replace a coil spring, it is crucial to properly prepare the vehicle. This includes Lifting the Vehicle Safely and Securing the Vehicle to ensure a safe and successful coil spring replacement process.

Lifting The Vehicle Safely

  • Use a jack stand to elevate the vehicle off the ground.
  • Position the jack stand under a sturdy part of the vehicle’s frame for stability.
  • Ensure the vehicle is on a level surface before lifting to prevent accidents.

Securing The Vehicle

  1. Chock the wheels to prevent any movement while working on the vehicle.
  2. Double-check that the handbrake is engaged to keep the vehicle stationary.
  3. Consider using wheel blocks for added security during the coil spring replacement.

Removing The Old Coil Spring

Removing the Old Coil Spring:

Detaching Suspension Components

Start by detaching the shock absorber and sway bar links from the old coil spring.

Releasing Tension From The Spring

  • Use a spring compressor tool to safely release tension from the coil spring.
  • Gradually unwind the compressors to relieve pressure on the spring.
How to Replace a Coil Spring


Installing The New Coil Spring

Once you have removed the old coil spring from your vehicle’s suspension system, it’s time to install the new one. This process requires careful positioning of the new spring and reattaching the suspension components. Here’s how to do it:

Positioning The New Spring

  1. Begin by ensuring that the new coil spring is the correct size and type for your vehicle. Refer to your car’s manual or consult with a professional if you are unsure.
  2. Place the new coil spring horizontally onto the lower control arm. Make sure it is aligned properly and securely in position.
  3. If your coil spring has a pigtail end, insert it into the appropriate notch or pocket on the lower control arm. This will help keep the spring in place during installation.
  4. Slowly lower the jack or lift that supports the control arm to carefully compress the coil spring. Take your time to ensure that the spring seats properly and is securely held in place.
  5. Double-check the position of the coil spring to make sure it is centered and aligned vertically with the upper control arm.
  6. If necessary, use a pry bar or a coil spring compressor tool to adjust the position of the spring. Be cautious and follow the tool’s instructions carefully to avoid any damage or injury.

Reattaching Suspension Components

After the new coil spring is positioned correctly, you need to reattach the suspension components for a complete installation. Follow these steps:

  1. Start by reconnecting the sway bar link to the lower control arm. Use the appropriate size wrench or socket to tighten the nut securely.
  2. Next, reattach the strut or shock absorber to the upper mount. Ensure it is oriented correctly and tighten the bolts according to the manufacturer’s specifications.
  3. Reconnect the lower control arm to the steering knuckle or axle shaft. Use a torque wrench to tighten the bolt or nut to the required specifications.
  4. Inspect the entire suspension system for any loose connections or misalignments. Make any necessary adjustments before proceeding.
  5. Finally, repeat the same steps for the other side of the vehicle if you are replacing both coil springs. It is crucial to maintain the same installation process on both sides to ensure balanced suspension performance.

By following these steps for positioning the new coil spring and reattaching the suspension components correctly, you can ensure a smooth and successful installation. Remember to always prioritize safety and consult a professional if you have any doubts or concerns.

Testing And Final Adjustments

Once the new coil spring has been installed, it’s time to perform the necessary testing and make any final adjustments to ensure everything is in proper working order. This crucial step will help guarantee the safe and smooth operation of your vehicle.

Lowering The Vehicle

After the coil spring has been securely installed, carefully lower the vehicle back down to the ground. It’s important to do this slowly and steadily to prevent any sudden shifts in weight or unanticipated movements.

Checking For Proper Installation

Once the vehicle is back on the ground, visually inspect the coil spring to ensure it’s properly seated and aligned. Verify that all connections and components are secure and in their correct positions before proceeding further.

How to Replace a Coil Spring


How to Replace a Coil Spring


Frequently Asked Questions Of How To Replace A Coil Spring

Can I Replace A Coil Spring Myself?

Yes, you can replace a coil spring yourself with proper tools and knowledge. It’s important to follow safety precautions and consult a manual for guidance.

Is It Hard To Replace A Rear Coil Spring?

Replacing a rear coil spring is not a difficult task. It can be done easily with basic tools and some mechanical knowledge. However, it is recommended to seek professional assistance to ensure proper installation and avoid any potential safety risks.

How Much Does It Cost To Replace Coil Springs?

The cost to replace coil springs typically ranges from $200 to $500, including parts and labor.

Can You Replace A Single Coil Spring?

Yes, you can replace a single coil spring. It’s a straightforward fix that can be done by a mechanic.

Can I Replace A Coil Spring Myself?

Yes, you can replace a coil spring yourself with basic mechanical knowledge and proper tools.

What Tools Do I Need To Replace A Coil Spring?

You will need a coil spring compressor, wrenches, a jack, and safety goggles.

How Do I Know If My Coil Spring Needs Replacing?

Look for signs of sagging, vehicle leaning to one side, or clunking noises over bumps.


Replacing a coil spring may seem like a daunting task, but with the right tools and guidance, anyone can successfully complete the job. By following the step-by-step instructions outlined in this blog post, you can ensure a safe and effective replacement of your coil spring.

Remember to take your time, be cautious, and refer back to this post as needed. With practice, you will become confident in your ability to replace coil springs and save money on costly repairs. Happy wrenching!

Similar Posts

Leave a Reply