How Long Of A Trolling Motor Shaft Do I Need

There is no one-size-fits-all answer to this question, as the length of trolling motor shaft you need will depend on the specific boat you are using it on. However, as a general rule of thumb, most people find that a shaft length of around 54 inches is ideal for most boats. This will ensure that the motor is able to reach the water, even when the boat is on a trailer.

If you are unsure, it is always best to err on the side of caution and go for a longer shaft.

If you’re looking for a trolling motor for your boat, one of the first things you need to consider is the shaft length. But how do you know how long of a shaft you need? There are a few things to take into account when choosing the length of your trolling motor shaft.

First, you need to know the depth of the water you’ll be using it in. The shaft needs to be long enough to reach the bottom of the lake or river, plus a few feet for clearance. Next, you need to consider the size of your boat.

A longer shaft is going to be more difficult to maneuver in tight spaces, so if you have a smaller boat, you might want to go with a shorter shaft. Finally, think about how you’ll be using your trolling motor. If you’re mostly fishing in open waters, you’ll need a longer shaft to get to the fish.

Credit: www.youtube.com

How long of a shaft does my trolling motor need?

If you’re looking for a trolling motor for your boat, one of the first things you need to consider is the shaft length. The shaft length is an important factor in choosing a trolling motor, as it needs to be long enough to reach the water from your boat’s deck. But how long of a shaft do you need?

The answer to this question depends on a few factors, such as the size and type of boat you have, as well as how deep the water is that you’ll be trolling in. In general, however, most trolling motors come with shafts that are between 3 and 8 feet long. If you have a small boat or kayak, a shorter shaft length will likely suffice.

For larger boats, however, you’ll need a longer shaft to make sure the trolling motor can reach the water. In very deep water, a longer shaft is also necessary to ensure the motor is submerged enough to work properly.

Can your trolling motor shaft be too long?

There are a few things to consider when determining how long of a trolling motor shaft you need. The first is the size and type of boat you have. A smaller boat will require a shorter shaft, while a larger boat will need a longer shaft.

The second is the type of trolling motor you have. Some trolling motors have adjustable shafts, while others do not. The third is the type of water you will be using the trolling motor in.

Shallow water will require a shorter shaft, while deeper water will need a longer shaft. fourth is the type of fishing you will be doing. If you are fishing in open water, you will need a longer shaft to reach the fish.

If you are fishing in a river or stream, you will need a shorter shaft to maneuver around the obstacles. The fifth and final consideration is your budget. Trolling motors with longer shafts are more expensive than those with shorter shafts.

What size trolling motor do I need for a 16 foot boat?

Assuming you are referring to a trolling motor for a boat, the length of the shaft you need depends on a few factors. First, you need to know the length of your boat. Next, you need to take into account how you will be mounting the trolling motor.

Some trolling motors can be mounted in multiple ways, so you will need to know how you want to mount it before you can determine the correct shaft length. If you are mounting the trolling motor on the transom (back) of the boat, you will need a shaft that is long enough to reach the water when the boat is in the water. The most common shaft length for transom-mounted trolling motors is 36 inches.

However, if you have a particularly large boat or you are mounting the trolling motor high up on the transom, you may need a longer shaft.

How do you size a trolling motor?

If you’re unsure of the size of trolling motor shaft you need, a good rule of thumb is to get the longest shaft possible. This will give you the most maneuverability and allow you to get into the tightest spots. It is also important to consider the size and weight of your boat when choosing a trolling motor shaft.

A heavier boat will need a stronger and longer shaft to provide adequate power.

Trolling motor shaft length for deep v

There are a few things to consider when determining how long of a trolling motor shaft you need. First, you need to know the size and weight of your boat. A bigger, heavier boat will require a longer shaft.

Second, you need to consider how deep the water is that you’ll be using the trolling motor in. Deeper water will require a longer shaft so the motor can reach the bottom. Finally, you need to think about how far you want to be able to move the boat with the trolling motor.

A longer shaft will give you more power and range. So, how long of a trolling motor shaft do you need? It really depends on your specific situation.

But, in general, a longer shaft will be better for a bigger, heavier boat in deeper water.

Minn kota trolling motor shaft length

If you’re looking to purchase a trolling motor, one of the first decisions you’ll need to make is what size shaft you need. The size of the trolling motor shaft is determined by the depth of the water where you’ll be using it. In general, you’ll need a longer shaft for deeper water and a shorter shaft for shallower water.

Here’s a breakdown of the different shaft lengths available and the recommended depths for each: -12 inch shaft: This is the shortest shaft available and is typically only used in very shallow water (less than 3 feet). -24 inch shaft: This is the most common shaft size and is recommended for depths up to 6 feet.

-36 inch shaft: This is the longest shaft available and is recommended for depths greater than 6 feet. Keep in mind that these are only general guidelines.

Trolling motor shaft length for jon boat

A trolling motor is a self-propelled device that is used to propel a fishing boat through the water. The trolling motor is mounted on the stern of the boat and is used in addition to the boat’s main engine. The trolling motor is used to move the boat at slow speeds and is ideal for fishing.

There are a few factors to consider when determining the length of trolling motor shaft that you need. The first factor is the size of your boat. The larger the boat, the longer the trolling motor shaft will need to be.

The second factor is the type of water you will be using the trolling motor in. If you will be using the trolling motor in shallow water, you will need a shorter shaft. However, if you will be using the trolling motor in deeper water, you will need a longer shaft.

The third factor to consider is the type of fishing you will be doing.

Trolling motor shaft too long

If you’re wondering how long of a trolling motor shaft you need, the answer depends on a few factors. First, consider the size and type of boat you have. A small boat will require a shorter shaft than a larger boat.

Second, think about how you’ll be using your trolling motor. If you’ll be mostly using it in shallow water, you won’t need as long of a shaft as you would if you were using it in deeper water. Finally, take into account the height of your trolling motor.

A taller trolling motor will need a longer shaft to reach the water. Now that you know the factors to consider when choosing a trolling motor shaft, you can make a more informed decision about what size you need. Keep in mind that you can always go with a longer shaft if you’re unsure – you can always cut it down to size if needed.

But if you choose a shaft that’s too short, you’ll be stuck with it.

Trolling motor shaft length for kayak

If you’re not sure what size trolling motor shaft you need, there are a few things to consider. First, think about the size and type of boat you have. If you have a small boat, you’ll need a shorter shaft.

If you have a larger boat, you’ll need a longer shaft. Second, consider how deep the water is that you’ll be fishing in. If you’re fishing in shallow water, you’ll need a shorter shaft.

If you’re fishing in deep water, you’ll need a longer shaft. Third, think about the type of fishing you’ll be doing. If you’re fishing in open water, you’ll need a longer shaft.

If you’re fishing in tight spots, you’ll need a shorter shaft. Now that you have a few things to consider, let’s look at some specific shaft lengths. For a small boat, you’ll need a shaft that’s between 24 and 36 inches long.

Trolling motor shaft length for bass boat

If you’re in the market for a trolling motor, one of the first questions you’ll need to answer is how long of a shaft you need. The answer to this question depends on a few factors, including the type of boat you have and how you plan to use the trolling motor. In general, the longer the trolling motor shaft, the better.

A longer shaft will give you more control and maneuverability, and will also be less likely to get caught on objects in the water. That said, a trolling motor shaft that is too long can be difficult to control, so you’ll need to strike a balance. The type of boat you have will also impact the length of trolling motor shaft you need.

For example, if you have a small kayak or canoe, you won’t need a very long shaft. However, if you have a larger boat, you’ll need a longer shaft to reach the water.

Trolling motor shaft length ranger bass boat

There’s no easy answer when it comes to deciding how long of a trolling motor shaft you need. A variety of factors such as the type of boat you have, the type of fishing you’re doing, and the size of the water you’re fishing in will all play a role in determining the best length for your needs. One general rule of thumb is that the trolling motor shaft should be at least as long as the boat’s beam (width).

This ensures that the motor will be able to reach the water when the boat is in the water and provides adequate power and thrust. If you’re unsure of what size trolling motor shaft to get, it’s always best to err on the side of caution and go with a longer one. You can always shorten the shaft if needed, but if you get a shaft that’s too short, you’ll be stuck with it.

When it comes to trolling motor shafts, size does matter.

Motorguide shaft length

There’s a lot to consider when purchasing a trolling motor for your boat. One of the most important factors is the length of the shaft. The standard trolling motor shaft is six feet, but there are also options for shorter and longer shafts.

The length of the trolling motor shaft you need depends on the size and type of boat you have. For smaller boats, a shorter shaft may be sufficient. But for larger boats, a longer shaft is necessary to reach the water.

When choosing the length of your trolling motor shaft, also consider the type of fishing you’ll be doing. If you’ll be fishing in shallow waters, a shorter shaft may be all you need. But if you’ll be fishing in deeper waters, a longer shaft is a better option.

No matter what size or type of boat you have, there’s a trolling motor shaft that’s just right for you. So do your research and choose the one that best suits your needs.

Conclusion

If you’re wondering how long of a trolling motor shaft you need, the answer depends on the size and type of boat you have. For smaller boats, a shorter shaft is usually sufficient, while larger boats will need a longer shaft to reach the water. There are also different types of trolling motors available, so be sure to consult with a professional before making your purchase.