How to Turn off Brake Light on Dashboard

To turn off the brake light on the dashboard, locate the brake light fuse in the fuse box and remove it. Brake lights are a crucial safety feature of a vehicle, indicating to other drivers when you’re slowing down or stopping.

However, sometimes the brake light on the dashboard may remain on even when the brakes are not engaged. This can be a cause for concern, as it may indicate a problem with the brake system or simply a faulty sensor.

In any case, addressing this issue promptly is essential to ensure proper functioning of your vehicle. We will explore the steps you can take to turn off the brake light on your dashboard and troubleshoot any underlying issues.

Common Reasons For Brake Light On Dashboard

Common Reasons for Brake Light on Dashboard

Faulty Brakes Or Braking System

One of the most common reasons for the brake light on the dashboard is due to faulty brakes or braking system components such as worn brake pads or malfunctioning brake lights.

Low Brake Fluid Level

Another common cause for the brake light indicator is low brake fluid in the reservoir, indicating potential issues with the braking system’s hydraulic pressure.

How to Turn off Brake Light on Dashboard


Steps To Turn Off Brake Light On Dashboard

Dealing with a brake light that is constantly on can be frustrating and worrisome. However, there are a few simple steps you can follow to turn off the brake light on your dashboard. In this post, we will guide you through the process, step by step, so you can resolve the issue and get peace of mind while driving.

1. Locate The Brake Fluid Reservoir

Before you proceed any further, you need to locate the brake fluid reservoir in your vehicle. This is an essential step as it will allow you to check the brake fluid level and ensure it is not the cause of the brake light being on. The brake fluid reservoir is typically located near the back of the engine compartment and is usually a clear plastic container with a cap on top.

2. Check And Refill Brake Fluid

After locating the brake fluid reservoir, carefully remove the cap and inspect the fluid level. The level should be between the “minimum” and “maximum” marks indicated on the reservoir. If it is below the minimum mark, you will need to add brake fluid to bring it back to the appropriate level. Be sure to use the recommended type of brake fluid specified in your vehicle’s owner’s manual.

If the brake fluid level is already within the optimal range, move on to the next step to troubleshoot the issue.

3. Inspect Brake Pads And System

Faulty brake pads or a malfunctioning brake system can also trigger the brake light on the dashboard. To inspect the brake pads, place a jack under the vehicle and lift it off the ground. Remove the wheels one by one and visually inspect the brake pads. If you notice that they are worn out or damaged, they will need to be replaced.

In addition to brake pads, it is essential to check the brake system for any leaks, loose connections, or damaged components. If you are not confident in inspecting or repairing the brake system yourself, it is recommended to consult a professional mechanic.

4. Reset The Dashboard Brake Light

Once you have checked and addressed any potential issues with the brake fluid, brake pads, and brake system, it is time to reset the dashboard brake light. To do this, you can follow these general steps:

  1. Start your vehicle and ensure it is in park or neutral mode.
  2. Locate the brake light reset button or switch, which is typically found near the dashboard panel.
  3. Press and hold down the reset button or switch for a few seconds until the brake light on the dashboard turns off.
  4. Turn off the vehicle and restart it to ensure that the brake light remains off.

If the above steps do not turn off the brake light on your dashboard, or if it continues to reappear after being reset, it is advisable to seek professional assistance to diagnose and resolve the issue.

By following these steps and troubleshooting methods, you can effectively turn off the brake light on your vehicle’s dashboard and ensure that your braking system is functioning optimally. Remember, regular maintenance and inspections of your vehicle’s braking components are essential for safe and worry-free driving.

When To Seek Professional Help

If your brake light won’t turn off on the dashboard, it’s crucial to seek professional help promptly. Ignoring this issue can lead to serious safety risks on the road. Schedule an appointment with a certified mechanic to diagnose and fix the problem efficiently.

While troubleshooting the brake light on your dashboard can often be done by yourself, there are certain situations that may require the expertise of a professional. Here are two instances where seeking professional help becomes necessary:

Continued Illumination After Troubleshooting

If the brake light on your dashboard continues to stay on even after performing troubleshooting steps, it is advisable to consult a professional mechanic. They have the necessary tools and knowledge to diagnose and fix any underlying issues that may be causing the problem. Ignoring this persistent brake light can lead to potential safety hazards, as it indicates a malfunction in your vehicle’s braking system. Therefore, seeking professional help is crucial in such cases.

Unusual Brake Behavior

Another situation that requires professional attention is when you notice unusual behavior with your brakes. If your brakes are not responding as they should or if you experience a spongy or soft pedal, it is best to let a professional handle the situation. These issues could be an indication of a larger problem, such as air in the brake lines or a failing brake master cylinder. A knowledgeable mechanic can accurately diagnose the issue and provide the necessary repairs or replacements to ensure your brakes are working optimally.

Remember, the brake light on your dashboard is a crucial safety feature that should not be ignored. Seeking professional help when troubleshooting efforts fail or when you notice unusual brake behavior is essential to ensure your vehicle’s braking system is functioning correctly, keeping you and others on the road safe.

How to Turn off Brake Light on Dashboard


How to Turn off Brake Light on Dashboard


Frequently Asked Questions On How To Turn Off Brake Light On Dashboard

Why Wont My Brake Lights Go Off On My Dash?

The brake lights on your dash may not go off due to a stuck brake pedal switch. Check and replace the switch if necessary to resolve the issue.

Why Is My Dashboard Brake Light On?

The dashboard brake light comes on to indicate potential issues with the braking system. It could be due to low brake fluid, worn brake pads, or a malfunction. Immediate inspection and repair by a qualified mechanic are necessary to ensure safe driving.

How Do I Clear My Parking Brake Light?

To clear your parking brake light, ensure the brake is fully disengaged and check the brake fluid. If needed, top it up or seek professional help.

How Do You Reset The Brake Pad Indicator Light?

To reset the brake pad indicator light, follow these steps: 1. Start the car’s ignition. 2. Press and hold the brake pedal. 3. Locate the indicator light on the dashboard. 4. Press the reset button next to the indicator. 5.

Hold it for a few seconds until the light turns off.

How Do I Identify The Reason For The Brake Light On My Dashboard?

To identify the reason for the brake light on your dashboard, check your brake fluid level and inspect for any possible leaks.

What Should I Do If The Brake Light Remains On?

If the brake light remains on, it could indicate a potential issue with the brake system. It’s crucial to have it inspected by a professional mechanic.

Can I Turn Off The Brake Light On My Dashboard Myself?

In some cases, you may be able to resolve the issue causing the brake light to illuminate, such as refilling the brake fluid. However, for more complex problems, it’s advisable to seek professional assistance.


To sum up, addressing a brake light on your dashboard is crucial for safe driving. Following these steps can help you troubleshoot and resolve the issue efficiently. Remember to consult your vehicle manual or a professional if unsure. Stay proactive in maintaining your car’s safety features for a smooth driving experience.

Similar Posts

Leave a Reply