Last Updated on 9 months by GuestAdmin
To convert your aluminum boat to a troller, you will have to fix the trolling motor on it. This is basically a self-contained unit which comprises some controls, electric motor, and a propeller. It is used to provide the boat some power which may help it to scoop out fish from the river bed.Knowledge on how to mount a trolling motor is some what tricky,improper mounting may result in malfunctioning or loss of speed.
This kind of motor may be attached to various parts of the boat like the stern, bow, transom or the engine. Of these options, the transom stands out as the best and most reliable. It is a flat and horizontal beam which reinforces the stern of the boat.
It is great for the fixing of an extra motor as that is the ideal location for such an item. The power it generates can easily be transmitted to the rest of the boat. Moreover, the fixing of the motor in this place makes the propulsion and steering quite convenient.
How To Mount A Trolling Motor
Tools and Materials Required
Open the mounting bracket clamps
First of all, to start off the mounting process, open the mounting bracket clamps. Use a screwdriver to do this job. Go slow as you do this to prevent a situation where the materials fall off and are irretrievable. You may wish to take the photos of the entire process to aid in the re-assembly later on.
The exact position of the mounting bracket clamps varies from model to model. Generally speaking though, you will find them at the back of the boat and along the axis of the transom. Refer to the manufacturer’s manual in case you cannot see them or are experiencing difficulties in finding them.
Place the trolling motor close to the transom
Now get to the second step of placing the trolling motor as close to the transom as possible. Take great care that you do not interfere at all with the main motor of the boat. The end result may often be too catastrophic to handle as it may entail the input of too much money and financial resource base.
Next, match the parts and mounting slots as perfectly as can be. You definitely want to minimize any inconsistencies which may interfere with the operations of the motor later. In case you experience any confusion at this stage, do not hesitate to seek assistance from an experienced technician. The dangers that may come along later may be too grave to bear or reverse. Screw the slots together and as tighter as can be.
Also Read : ABC of electric bike conversion Kit
Tighten up the clamps
At last, Move on to tighten the clamps yet again. First of all, you have to return them to their exact positions. Use the video footage which you captured in the process of dismantling them as a guide. In most boats, you will have to turn the clamps and the screws to the right to do the job. Check out every slot and see to it that it is properly clamped and tighter for that matter.
Test the System
Well, Now you are good to go. However, before you launch the boat for eventual operations, you now have to test the system to see whether it is indeed up to standards. Go for a short ride as close to the bank as possible to ascertain this.
Be sure to have some rescuers or colleagues on standby to minister to you just in case you might experience an emergency. Attempt every possible maneuver in the course of this test drive. Turn the boat to the left, right, increase speed, and engage the brakes, among others.
In the course of doing this, pay attention to the manner in which the boat responds to these prompts. This will help you to identify any issues which might cause trouble later. If the boat experiences no hitches, you are good to go! If however, you note any issues, take note of them and handle them appropriately later.
Moving forward ,The above procedures are strictly for mounting the extra trolling motor on the transom. As stated, you have other options and positions for your consideration. These include the stern, bow, transom and the engine.
The exact procedures may differ from one location to another. You should, therefore, make an effort to familiarize yourself with these procedures to avoid any mishaps later.
Well, you have indeed received the insight on how to mount a trolling motor. We are now pretty confident that you can do a better job on the whole. Kindly go ahead to mount your extra motor as conveniently as can be using our guidelines above as your basis.
You want your peers and colleagues to enjoy similar benefits, don’t you? Why don’t you now go ahead to share this information as far wide as possible? You will indeed aid many to leverage the exact same benefits as you. Best of luck in your next motor mounting exercise!