How To Install A Boat Grill

How To Install A Boat Grill

Preparing for a boat trip? You definitely have to know how to install a boat grill. Such a piece of knowledge will definitely equip you with the expertise you may have to rely on. We are here to help with just that. Our research here below endeavours to showcase how to go about this whole issue.

For a start, we shall examine those issues you have to look into before endeavoring to install the boat grill.

Then, we shall go ahead to examine the steps to use to actualize this feat. As you read through, you will know the precautions you have to take as well.

Table of Contents

What To ConsiderR Before Installing A Boat Grill

Cooking Capacity

How much food do you intend to prepare at any given time? Ask and answer this question precisely.

It is only by doing this that you will be able to find the right match of an appliance. Choosing one that is too small or too large may be inconvenient for you.

Weather Conditions

The typical outdoor environment is prone to all manner of adverse weather conditions. These include snow, harsh winds, storms, and extreme sunlight among others.

It is yet again necessary to match the right grill with the right environment. That way, you will suppress the inconveniences that arise generally.

Space Availability

Grills, like any other appliance, also come in diverse shades and sizes. It is important yet again to match the right grill with the space you have at your disposal.

This is to reduce frictions and inconveniences that potentially come along in the course of the use of these appliances altogether.

Fuel Source

They also draw their fuels from diverse sources. Examples of these are the propane gas, liquefied petroleum gas, charcoal, and mains electricity.

It is important to find the fuel source that is affordable to you, able to perform well and generates hot flames to impact your recipes accordingly.

Operational Skill

As a last consideration, you should also figure out the operational skill and expertise you have to put in so as to operationalize the grills altogether.

A good grill on this consideration ought to be easily operable to avoid unnecessary redundancies. You need an honest assessment of your own skills to do this.

Also Read : Clean Your Boat Grill Easily

Tools and Items Required

  • Level
  • Wet saw
  • Measuring tape
  • Notched trowel
  • Electrical saw
  • Striking tool
  • Barbecue grill
  • Bluestone countertop
  • Mortar
  • Kegerator
  • Stone sealer
  • Thin stone veneer
  • Fiber-reinforced concrete shell
  • Chalk

How To Install A Boat Grill

#1 Install the unit shell

Your first task should be to install the unit shell. It is in this unit that you will fix the other parts and components of the grill.

The fiber-reinforced concrete is by far the strongest and most reliable shell to look up to. It is strong yet light enough to carry around as the need may so determine.

#2 Mark out the openings for the Kegerator and the grill

Next, mark out the openings for the Kegerator and the grill. As you do so, factor the heights, widths, and the depths of both units.

Use these measurements as the basis of incising some cuts later on. The electric saw will be your best bet here as it does a pretty accurate cutting task. Exercise some caution as you do this.

#3 Fix in place the Bluestone Countertop

Place a countertop, preferably made of the Bluestone, atop the unit. Fix the countertop firmly by use of mortar.

Leave some space for the Kegerator tap as well as the grill top holes. Apply some pressure to the mortar as soon as you are free. Leave to set for two hours to make it harden.

#4 Mount the Grill Top

With the hardened, you now have to mount the grill top. This will require that you employ a bespoke or pre-existing grill unit.

Position the grill strategically and be sure to fix it firmly. If the grill is incompatible with the available space, you may have to place an order for a customized one.

#5 Slide the Kegerator firmly in place

Having fixed the grill top in its rightful position, you now have to slide the Kegerator firmly in place. Slot it in the hole you will have cut out beforehand.

This ought not to be daunting in case you marked out accurate measurements. Follow this by aligning the hole for the tap. Match the holes atop the Kegerator with that of the unit shell.

#6 Apply veneer

It is definitely important to reinforce the joints and bonds firmly enough. This is a task you achieve by applying some veneer on the holes in between the installations.

The Thinstone Veneer is by far the most outstanding of all veneers. We subsequently recommend it for the job. Use some twisting motions to set the veneer firmly in place and prevent any fall-offs.

#7 Set up the Kegerator Tap

Conclude the exercise by setting up the Kegerator tap. Align the hole atop the Kegerator with that in the Bluestone and unit shell. Next, get hold of the tap and then align it with the hole that exists atop the keg.

As you do so, push the ball-bearings downwards slide it in place by applying some clockwise motions.

Uphold some downward pressure as you spin the tap firmly in place. After this is done, lock it firmly. The tap is now ready for eventual use.

Conclusion

Boat grills are potentially harmful appliances. This stems from the fact that they draw their power from the explosive cooking gases.

We advise you to take accurate caution to avoid a situation whereby you might have to suffer burns or explosions. In fact, we recommend that you leave it to the experts if you are unsure.

With the knowledge we have provided, we are now confident that you have the preparation you need to do a better job.Could it be that there are issues you might want us to clarify? Kindly let us know. We are always upbeat on the success of the readers of our posts.

Similar Posts

Leave a Reply